Care And Maintenance; Troubleshooting - VTech Switch&Go Dinos Defender the Velociraptor Parents' Manual

CARE & MAINTENANCE
1. Keep the dino clean by wiping it with a slightly damp cloth.
2. Keep the dino out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the dino is not in use for an
extended period of time.
4. Do not drop the dino on a hard surface and do not expose the
dino to excess moisture.

TROUBLESHOOTING

If for some reason the dino stops working, please follow these steps:
1. Please turn the dino OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the dino stand for a few minutes, then replace the batteries.
4. Turn the dino ON. The dino should now be ready to play with
again.
5. If the dino still does not work, install a brand new set of batteries.
If the problem persists, please contact our Consumer Services
Department, and a service representative will be happy to help you.
8