Table of Contents
Advertisement
NOTE
The jack is designed only to raise
and hold the vehicle for a short
time while a wheel is being
changed. It is not suited for per-
forming maintenance work under
the vehicle.
Use the jack on level, hard
ground.
Avoid changing
wheel on uphill and downhill
slopes. Chock the wheels, if the
deflated wheel needs to be
changed on slope / ghat area.
Before raising the vehicle, secure
it from rolling away by applying
the parking brake.
Do not use wooden blocks or sim-
ilar objects as a jack underlay.
Do not place your hands and feet
or lie under the raised vehicle
when it is supported by a jack.
Do not run the engine when the
vehicle is supported by the jack
and never allow passengers to re-
main in the vehicle.
Do not open or close a door or the
tailgate when the vehicle is
raised.
Assemble the Jack handle and wheel
spanner (as shown in fig.)
Position the jack vertically and raise it by
the
turning the jack handle clockwise until
the jack sits completely on the specified
point and the base of the jack lies evenly
on the ground.
The jack up points are indicated by cut-
outs on the front and rear.
EMERGENCY AND BREAKDOWN ASSISTANCE
Jack up point location on vehicle
Jack up point location
Jacking point location
147
Advertisement
Table of Contents
