Toshiba D-VR650KU Owner's Manual page 51

9
Press [TIMER SET] to set a timer
programming.
will appear on the front panel display, while this
unit waits to make the recording.
CS
"VCR" will appear
timer recording have been set.
Analog TV
For channel number 2-6, press [B] or [ – ] to decide the channels. For other channels (7-69), the
channel will be decided as soon as you enter the channel number.
Analog CATV
For channel number 1-12, press [B] or [ – ] to decide the channels. For other channels (13-125),
the channel will be decided as soon as you enter the channel number.
For major channel number 1-9, press [B] or [ – ] after selecting the number with [K / L]. For the
Digital TV
other channels (10-99), the channel will be decided as soon as you enter the channel number.
For major channel number 1-13, press [B] or [ – ] after selecting the number with [K / L]. For the
Digital CATV
other channels (14-135), the channel will be decided as soon as you enter the channel number.
minor channels
For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the
channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) "5": [0]+[5]
• For selecting the channels with [K / L], you need to press [B] or [ – ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel you are selecting is existing.
[K / L] does not skip the non-existed minor channels.
E9MG0UD_D-VR660KU_EN.indd 51 E9MG0UD_D-VR660KU_EN.indd 51
TIMER RECORDING
DR CD
HDD
DVD
on the front panel display if VCR
How to select a channel number for the timer recording
EN 51
2008/01/29 17:21:02 2008/01/29 17:21:02