Toshiba D-VR650KU Owner's Manual page 50

Use [K / L] to enter the date, then
3
press [B].
Timer Programming
Date Start
New Program
Date
JAN/02
CH
DTV125- 1
JAN/01
Daily
MON-SAT
MON-FRI
SAT
FRI
SUN
JAN/31
Use [K / L / { / B] or [the Number
4
buttons] to enter the start and end
time, then press [B].
New Program
Date
JAN/02 12 : 00AM
CH
DTV125- 1
• You cannot make a program which recording
time exceeds 12 hours.
Use [K / L] to select analog ("- - -") /
5
digital ("DTV") mode or external
input (L1 / L2), then press [B].
New Program
Date
JAN/02 12 : 00AM
CH
L1
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] to select the channel number to
record.
For digital mode, select both major and minor
channels. Refer to "How to select a channel
number for the timer recording" on page 51
for more details.
e.g.) analog mode
New Program
Date
JAN/02 12 : 00AM
CH
10
50 EN
E9MG0UD_D-VR660KU_EN.indd 50 E9MG0UD_D-VR660KU_EN.indd 50
TIMER RECORDING
TUE JAN/01 10:00AM
End CH
Start End
- - : - - - - : - -
REC To Mode
DVD SP
SP 2 : 00
1/1
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
Start End
- - : - -
REC To Mode
DVD SP
SP 2 : 00
1/1
Start End
1 : 00AM
REC To Mode
DVD SP
SP 1 : 00
1/1
Start End
1 : 00AM
REC To Mode
DVD SP
SP 1 : 00
1/1
e.g.) digital mode
New Program
Date Start
JAN/02 12 : 00AM
CH REC To
DTV125- 1 DVD
Use [K / L] to select a recording media
6
("DVD" or "VCR"), then press [B].
New Program
Date Start
JAN/02 12 : 00AM
CH REC To
DTV125- 1 DVD
Use [K / L] to select a recording
7
mode.
New Program
Date Start
JAN/02 12 : 00AM
CH REC To
DTV125- 1 DVD
Refer to "Recording Mode" on page 44 for DVD
or "Recording" on page 110 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Date Start
JAN/02 12 : 00AM
CH REC To
DTV125- 1 DVD
Auto recording mode select...
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
New Program
Date Start
JAN/02 12 : 00AM
CH REC To
DTV125- 1 DVD
• "Auto" is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
8
Press [ENTER] when all items are
entered.
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
"Timer program overlapped" appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
"Checking, canceling, or correcting the timer
programming information" on page 52.
End
1 : 00AM
Mode
SP
SP 1 : 00
1/1
End
1 : 00AM
Mode
SP
SP 1 : 00
1/1
End
1 : 00AM
Mode
SP
SP 1 : 00
1/1
End
1 : 00AM
Mode
SP
SP 1 : 00
End
1 : 00AM
Mode
Auto
Auto 1 : 00
1/1
2008/01/29 17:21:00 2008/01/29 17:21:00