Assembly Instructions - Stacked Ovens On Stand - Market Forge Industries 2600 HE Owner's Manual

High efficiency electric convection oven
Table of Contents

Advertisement

IMPORTANT NOTE: If stacked ovens are adjacent to moisture produc-
ing equipment (i.e. kettles or steam cookers) it is necessary to seal the
seam between the stacked ovens and the moisture producing equip-
ment to prevent condensation from entering control section of the bottom
oven. Silicone synthetic rubber is recommended for a sealant.
Figure 2.
ASSEMBLY INSTRUCTIONS (208/230V & 440/480V) STACKED OVENS WITH 7" STAND: (Figure 2)
1.
Mount bottom oven on stand using hardware (#4 & #5). Either oven may serve as bottom oven.
2.
Stack top oven on bottom oven. Be sure ovens in position are level front to back, side to side and diagonally.
Place lower oven in position, level it and make necessary adjustments prior to placing second oven. This
includes all adjustments to doors. The screws that hold the front trim at the top of the oven on the lower oven
should be removed prior to placing the top oven in position. This will permit removal of the cover or front trim
so that door adjustments may be made at a later time.
3.
Pull bottom trim panel forward to release from spring catches and lower to full open position as shown in figure
2 above.
4.
Remove screws and circuit breaker cover (#3 & #6) from 208/230V oven to make power supply connection.
Remove screws and circuit breaker cover (#3 & #2) from 440/480V oven to make power supply connection.
Bring power supply line in through 1 3/4" diameter knockout in rear panel.
5.
If space is available, right side panels can be removed from ovens to increase accessibility in making power
connections.
"OBSOLETE"
ITEM #
*PAINTED PART #
1
99-0851
2
99-3335
3
10-2352
4
10-2401
5
10-2034
6
99-3293
* PAINTED PARTS ARE NO LONGER AVAILABLE (OBSOLETE).
INSTALLATION
STAINLESS STEEL
PART #
DESCRIPTION
99-0853
SUPPORT STAND 7" HIGH
99-3335
TERMINAL BLOCK COVER
10-2352
BINDING HD. SCREW TYPE A #8 x 1/2" LG.
10-2401
PLAIN WASHER 3/8
10-2034
HX. HD. CAP SCREW 3/8-16 x 3/4 LG.
99-3293
CIRCUIT BREAKER COVER
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2800 he2692 he2892 he

Table of Contents