Toshiba XDE600KU Owner's Manual page 34

Function setup
Customizing the Function Settings (continued)
Setting details
4) Press "8888" using number buttons. (Please note, this is
presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.
The parental lock level is equivalent to the following
ratings:
Level 1: Kid Safe
Level 2: G
Level 3: PG
Level 4: PG-13
5) Press / to select the rating from 1 to 8. Rating one
(1) has the most restrictions while rating eight (8) can
virtually playback all DVD software.
6) Press OPEN/CLOSE button to activate the Parental
Level setting.
If the DVD has been designed to temporarily cancel
the Parental Level, the screen will change depending
on which disc is played. If you select "YES" with the
ENTER button, "Enter Password" screen will appear.
Input the 4-digit password as you have set then followed
by ENTER button and playback will start. If "NO" is
selected, press the OPEN/CLOSE to remove the
disc.
Notes
• If you input a wrong password, press CLEAR button and
re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
Set Password
DVD
New Password can be set to replace the default
password.
1) Press SETUP button.
2) Press / button to select Rating.
3) Press button, then use the
Password.
4) Press ENTER button. "Enter Password" screen will
appear.
5) Press the number buttons to input the current password
(If the password has not been set yet after you purchase
this unit, it is "8888"). Then press ENTER.
6) Press ENTER button again, "New Password" screen
will appear. Press the number buttons to input the new
password.
7) Press ENTER button, "Confirm Password" screen
will appear. Enter the same password again for
confi rmation.
8) Press ENTER button. Now your new password has been
set. Be sure to remember this number!
If you forget the password, you can erase your
current password by pressing number button
8 on the remote control four times, then press
ENTER button to confi rm the setting.
PASSWORD: 8888
34
Level 5: PG-R
Level 6: R
Level 7: NC-17
Level 8: Adult
Use Default Settings
If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
1) Press SETUP button.
2) Press
3) Press
4) P r e s s
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
DivX® Registration
Some DivX® Video-On-Demand files required
registration code, please get the code of your DVD
/ button to select Set
player as follow:
1) Press SETUP button.
2) Press
3) Press
4) Press ENTER button, your registration code will be
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Note
This registration code is for DivX® Video-On-Demand only.
Do not apply this code for other applications or websites.
Misc
/ button to select Misc.
button to select Use Default Settings, then
press ENTER button.
/
button to select
"Yes", then press
ENTER button.
T h e o r i g i n a l
Do you want to use default setting?
setting will be
restored.
/ button to select Misc.
button, then use the
DivX Registration.
shown.
Screen saver : On
HDMI Control : Off
Screen saver : On
/ button to select
Screen saver : On
DivX R Video On Demand
Your registration code is :