Charge Your Headset; Check Battery Level - Plantronics Poly Voyager 5200 Series User Manual

Charge your headset

Check battery level

Your new headset has enough power to pair and make a few calls directly out of the box. It takes
approximately 90 minutes to fully charge the headset; the indicator light turns off once charging is
complete.
A micro USB cable is supplied to allow you to charge the headset with an AC wall charger (not
included) or through a PC's USB port. The PC must be powered on to charge via USB 2.0 or higher.
NOTE
Always charge at near room temperatures; never charge battery at temperatures below 0°C
(32°F) or above 40°C (104°F).
Check your earbud battery level:
1
• Listen to the voice prompt when you remove your earbuds from case and put them on.
• View battery level in BackBeat app. Download at poly.com/software.
Voice prompt Listen time
"Battery high" 3 hours or more
"Battery medium" 1 to 3 hours
"Battery low" 10 minutes to 1 hour
"Battery critical" Less than 10 minutes
Check the charge case battery level by pressing the charge case button and viewing the LED inside
2
the case.
Charge case LED Battery level
Battery high
Battery medium
Battery low
Battery critical
4