Installation Of Memory Modules (Dimm) - ASROCK D21G3D4I2-2T User Manual

2.3 Installation of Memory Modules (DIMM)

This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and
supports Dual / Quad Channel Memory Technology.
1. For dual channel configuration, you always need to install identical (the same brand,
speed, size and chip-type) DDR4 DIMM pairs.
2. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;
otherwise, this motherboard and DIMM may be damaged.
3. Please install the memory module on CH0_A1 for the first priority.
4. To activate Dual Channel Memory Technology, please follow the "Dual Channel Memory
Configuration" table below.
Dual / Quad Channel Memory Configuration
DDR4_A1
Priority
(Blue)
1 Populated
2 Populated
*Since installing three memory modules is NOT supported on this motherboard, we suggest not using
this configuration.
The DIMM only fits in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
DDR4_B1 DDR4_C1
(Blue) (Blue)
Populated
Populated Populated
D2143D4I2-2T / D2163D4I2-2T
DDR4_D1
(Blue)
Populated
13