1. Manuals
  2. Brands
  3. Meyer Manuals
  4. Farm Equipment
  5. RL30-30
  6. Owner's/operator's manual

Meyer RL30-30 Owner's/Operator's Manual

Reloader
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PB-RL30-21
Patent
Pending
RELOADER
Model RL30-30
Owner / Operator's Manual
Starting 2021 Model Year
8 / 2020
6990633 (1-13)
Printed in U.S.A.
© Bobcat Company 2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RL30-30 and is the answer not in the manual?

Questions and answers

Related Manuals for Meyer RL30-30

Summary of Contents for Meyer RL30-30

  • Page 1 PB-RL30-21 Patent Pending RELOADER Model RL30-30 Owner / Operator’s Manual Starting 2021 Model Year 8 / 2020 6990633 (1-13) Printed in U.S.A. © Bobcat Company 2013...

  • Page 2: Important Information

    Always use your serial number when requesting information or when ordering parts. HOW TO READ YOUR SERIAL NUMBER RELOADER EXAMPLE: 21RL201 Model Year / Reloader / Sequence Of Build Meyer Manufacturing Corporation 674 W. Business Cty Rd A Dorchester, WI 54425 Phone: 1-800-325-9103 Fax: 715-654-5513 Email: parts@meyermfg.com...

  • Page 3: Pre-Delivery & Delivery Check List

    Owner’s Registration Form. PRE-DELIVERY CHECK LIST DELIVERY CHECK LIST After the new Meyer Reloader has been completely The following check list is an important reminder of set-up, check to be certain it is in correct running order valuable information that MUST be passed on to the before delivering it to the customer.
  • Page 4 Meyer Manufacturing Corporation 674 W. Business Cty Rd A Dorchester, WI 54425 Phone: 1-800-325-9103 Fax: 715-654-5513 Email: parts@meyermfg.com Website: www.meyermfg.com FARM EQUIPMENT BUYERS TRUST THE NAME MEYER! Meyer Manufacturing Corporation - 4 - PB-RL30-21 Check List...

  • Page 5: Introduction

    Meyer products the finest in the farm equipment industry today. There is no substitute for quality. That is why thousands of people like you have purchased Meyer farm equipment. They felt it was the best equipment to serve their farming needs, now and in years to come. We ask that you follow our policy of “safety first”, and we strongly suggest that you read through the “Owner /...
  • Page 6 FEATURES DESCRIPTION RL30-30 Clad-Tuff Fiberglass Woven Side Panels Solid Poly Floor - High Molecular Hydraulic Drive Rear Transport Lights - LED Meyer Manufacturing Corporation - 6 - PB-RL30-21...

  • Page 7: Table Of Contents

    TABLE OF CONTENTS 1.0 IMPORTANT INFORMATION ........... 2 2.0 PRE-DELIVERY &...
  • Page 8 MAINTENANCE RECORD ............47 Meyer Manufacturing Corporation...

  • Page 9: Manufacturer's Warranty

    Except as stated above, Meyer Mfg. Corp. shall not be liable for injuries or damages of any kind or nature, direct, consequential, or contingent, to persons or property. This warranty does not extend to loss of crop or for any other reasons.
  • Page 10 Meyer Manufacturing Corporation - 10 - PB-RL30-21...

  • Page 11: Safety

    5.0 SAFETY The Meyer Reloader is manufactured with operator safety in mind. Located on the reloader are various safety signs to aid in operation and warn of hazardous areas. Pay close attention to all safety signs on the reloader. Carefully follow the operating and maintenance instructions in this manual and all applicable safety laws. Failure to follow all safety procedures may result in serious injury or death.

  • Page 12: Safety Precautions

    Always install a SMV emblem on pull-type equipment when transporting on roadways and keep clean and bright. • Always yield to oncoming traffic in all situations and move to the side of the road so any following traffic may pass. Meyer Manufacturing Corporation - 12 - PB-RL30-21...
  • Page 13 Safety Precautions For Tractor Towed Units: • Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces. • Always install a SMV emblem on pull-type equipment when transporting on roadways and keep clean and bright. • Always yield to oncoming traffic in all situations and move to the side of the road so any following traffic may pass.

  • Page 14: Safety Signs

    DO NOT CHECK WITH HANDS. IF INJURED SEEK EMERGENCY MEDICAL ATTENTION. 46-8500-7 PART NO. 46-8500-7 PART NO. 46-0001-35 PART NO. 46-0001-214 PART NO. 46-3600-9 PART NO. 46-0001-22 PART NO. 46-0001-205 PART NO. 46-0001-72 Meyer Manufacturing Corporation - 14 - PB-RL30-21...
  • Page 15 FRONT LEFT OF RELOADER PART NO. 46-8500-7 PART NO. 46-9100-4 PART NO. 46-3600-6 PART NO. 46-0001-205 PART NO. 46-0800-7 PART NO. 46-0800-8 1-800-325-9103 PB-RL30-21 - 15 - www.meyermfg.com...
  • Page 16 FRONT PART NO. 46-8500-7 RLH SHOWN PART NO. 46-0001-4 PART NO. 46-0001-205 PART NO. 46-9100-4 PART NO. 46-0001-62 PART NO. 46-0001-214 Meyer Manufacturing Corporation - 16 - PB-RL30-21...
  • Page 17 RIGHT SIDE PART NO. 46-8500-7 PART NO. 46-9100-4 PART NO. 46-0001-205 PART NO. 46-3600-9 PART NO. 46-0001-212 1-800-325-9103 PB-RL30-21 - 17 - www.meyermfg.com...
  • Page 18 REAR WARNING 46-0001-33 KEEP ALL SHIELDS IN PLACE WHILE MACHINE IS RUNNING PART NO. 46-0001-33 Meyer Manufacturing Corporation - 18 - PB-RL30-21...
  • Page 19 LEFT SIDE PART NO. 46-9100-4 PART NO. 46-8500-7 PART NO. 46-0001-205 PART NO. 46-0001-212 PART NO. 46-3600-9 1-800-325-9103 PB-RL30-21 - 19 - www.meyermfg.com...

  • Page 20: Shutoff & Lockout Power

    It is important that everyone who works on this equipment is properly trained to help ensure that they are familiar with this procedure and that they follow the steps outlined above. This manual will remind you when to Shutoff & Lockout Power. Meyer Manufacturing Corporation - 20 - PB-RL30-21...

  • Page 21: Pre-Operation

    6.0 PRE-OPERATION DO NOT allow anyone to operate, service, inspect or otherwise handle this reloader until all operators have read and understand all of the instructional materials in this Operator’s And Parts Manual and have been properly trained in its intended usage. Verify that the reloader is securely fastened to the tractor.

  • Page 22: Pto Driveline

    PTO driveline angle is 0 degrees and a maximum angle of 15 degrees. Do not exceed the maximum PTO length B (MAX) of 72 inches. PTO PART NUMBER 18-0022 46.35 72.22 18-0023 46.35 72.22 FIGURE 2. PTO DRIVELINE Meyer Manufacturing Corporation - 22 - PB-RL30-21...

  • Page 23: Set Up

    6.3 SET UP To Prevent Serious Injury Or Death • Keeps hands and body out of the hitch area when attaching towing vehicle. • Keep body clear of crush point between towing vehicle and load. • Keeps hands, legs and feet from under tongue and hitch until jack is locked into place.

  • Page 24: Operational Checks

    9. Check all hydraulic components for leaks. 10. Adjust and lubricate equipment as needed. (See 8.1 LUBRICATION) & (See 8.2 ADJUSTMENTS). 11. Test each unloading trailers/vehicles to make sure the guide light sensor is working properly. Meyer Manufacturing Corporation - 24 - PB-RL30-21...

  • Page 25: Controls

    6.4.1 Controls A switch box is located on the driver's side of the reloader. There are 4 switches, one to turn the conveyor system on/off (Key 1), one to chose manual or remote mode (Key 2), one to turn on the guide lights (Key 3) (optional), and one to turn the bunk lights on/off (Key 4).

  • Page 26: Start-Up

    2. Turn the conveyor off with the remote control. 3. Turn the master conveyor power off. 4. Throttle the tractor down to an idle. 5. Disengage the PTO. 6. Stop the engine and exit the tractor. Meyer Manufacturing Corporation - 26 - PB-RL30-21...

  • Page 27: Tear Down

    6.5 TEAR DOWN Make sure nobody is under the reloader. To Prevent Serious Injury Or Death • Keeps hands and body out of the hitch area when attaching towing vehicle. • Keep body clear of crush point between towing vehicle and load. •...

  • Page 28: Transporting

    Keeps hands and body out of the hitch area when attaching towing vehicle. • Keep body clear of crush point between towing vehicle and load. • Keeps hands, legs and feet from under tongue and hitch until jack is locked into place. Meyer Manufacturing Corporation - 28 - PB-RL30-21...

  • Page 29: Hitching To Tractor

    To Prevent Serious Injury Or Death • Shift to lower gear before going down steep grades. • Avoid traveling on slopes or hills that are unsafe. • Keep towing vehicle in gear at all times. • Never exceed a safe travel speed (which may be less than 20 MPH.).

  • Page 30: Safety Chain

    NOTE: Do not use the intermediate support (Item 2) as the attaching point. If you do not have a safety chain, or a replacement safety chain is needed, see your local Meyer dealer and do not operate on public roads until you are able to travel with the safety chain properly installed.

  • Page 31: Unhooking The Tractor

    6.7.4 Unhooking The Tractor 1. Park the implement on level ground. Put the tractor controls in neutral, set the parking brake. 2. Place wheel chocks in front and in back of the implement wheels on opposite sides to prevent the implement from rolling after the tractor is unhooked.
  • Page 32 Meyer Manufacturing Corporation 674 W. Business Cty Rd A Dorchester, WI 54425 Phone: 1-800-325-9103 Fax: 715-654-5513 Email: parts@meyermfg.com Website: www.meyermfg.com FARM EQUIPMENT BUYERS TRUST THE NAME MEYER! Meyer Manufacturing Corporation - 32 - PB-RL30-21...

  • Page 33: Operation

    7.0 OPERATION DO NOT allow anyone to operate, service, inspect or otherwise handle this reloader until all operators have read and understand all of the instructional materials in this Operator’s Manual and have been properly trained in its intended usage. Before operating the reloader, look in all directions and make sure no bystanders, especially small children are in the work area.

  • Page 34: Unloading

    Never use “LIVE” power to aid in the clean-out of a clogged machine. If any component fails, shut off and lockout all power to the reloader. Repair or replace damaged components before proceeding with unloading of the material. Meyer Manufacturing Corporation - 34 - PB-RL30-21...

  • Page 35: Maintenance

    8.0 MAINTENANCE 8.1 LUBRICATION Shutoff and lockout power before performing machine service, adjusting, maintaining, or clearing an obstruction from this machine. Refer to section 5.3 SHUTOFF & LOCKOUT POWER. Fluid such as hydraulic fluid, grease, etc. must be disposed of in an environmentally safe manner.

  • Page 36: Weekly Lubrication (Every 56-70 Hours Of Operation)

    Check both gearboxes for any leaks. If leaking, replace required input/output shaft seals. 8.1.3 Monthly Lubrication (every 224-280 hours of operation) (Both Sides) (Both Sides) • Grease (15) driveline bearings (Item 8) with one pump of grease. Meyer Manufacturing Corporation - 36 - PB-RL30-21...
  • Page 37 • Change oil in both gearboxes after the first month of operation. (See section 8.1.5 Gearbox Oil Change.) • With the reloader in the transport position, check both gearbox oil levels by removing the hex head plugs (Item 9). Lubricate with EP 80W90.

  • Page 38: Annual Lubrication

    8.1.4 Annual Lubrication • Change oil in both gearboxes. (See section 8.1.5 Gearbox Oil Change.) • Take apart the PTO each season to be cleaned with solvent and re-coated with grease before re-assembling. Meyer Manufacturing Corporation - 38 - PB-RL30-21...

  • Page 39: Gearbox Oil Change

    8.1.5 Gearbox Oil Change Front Gearbox: • Drain the oil by removing the fill tube (Item 1). • Reinstall the fill tube. • Remove the allen head plug from the fill tube (Item 2). • Fill with 80W90 to the top of the fill tube. Rear Gearbox: •...

  • Page 40: Adjustments

    6. If the cotter pin hole in the spindle does not line up with the notch in spindle nut, back off the spindle nut only enough to line up. Reinstall cotter pin. If cotter pin is damaged, replace it. 7. Replace hub cap and lower wheel to the ground. Meyer Manufacturing Corporation - 40 - PB-RL30-21...

  • Page 41: Wheels And Tires

    8.2.3 Wheels and Tires BOLT/STUD SIZE SOCKET SIZE PRESS FORMED BOLT TYPE HEAVY DUTY WHEEL CENTER WHEEL CENTER ft-lb 15/16 / 1-1/16 100 ft lbs Bevel or Flange Nut ft-lb 1-1/8 / 1-1/2 Flange Nut Reloader Tire Wheel Installation • Clean adjoining surfaces.

  • Page 42: Storing The Reloader

    NOTE: A manual jack has been provided when storing this equipment in the hitching position. Sometimes it may be necessary to store your Meyer Reloader for an extended period of time. Below is a list of items to perform before storage.

  • Page 43: Parts Repair And Replacement

    Instruction sheets may be provided with your parts order. Otherwise, if available, instruction sheets can be e-mailed or faxed for you convenience. Call Meyer Manufacturing Corporation toll free at 1-800-325-9103 or email parts@meyermfg.com. NOTE: Be environmentally friendly and dispose of any waste materials properly. Recycle when appropriate.
  • Page 44 Meyer Manufacturing Corporation - 44 - PB-RL30-21...

  • Page 45: Specifications

    10.0 SPECIFICATIONS DIMENSIONS RL30-30 Inside Length Inside Width Inside Height Overall Length Overall Width Overall Height Overall Side Height Stringer Width SPECIFICATIONS RL30-30 Apron Chains (pintle) Rear Drive Shaft (HD Solid Shaft) Power Source Upright Spacing Upright / Cross Member Construction Unloading Time (Dependent of Hyd.
  • Page 46 Meyer Manufacturing Corporation - 46 - PB-RL30-21...

  • Page 47: Maintenance Record

    MAINTENANCE RECORD MODEL NO. ____________________________________ SERIAL NO. ____________________________________ DATE SERVICE PERFORMED DATE SERVICE PERFORMED Manufactured by: Meyer Manufacturing Corporation 674 W. Business Cty Rd A Dorchester, WI 54425 Phone: 1-800-325-9103 Fax: 715-654-5513 Email: parts@meyermfg.com Website: www.meyermfg.com...
  • Page 48 Meyer Manufacturing Corporation 674 W. Business Cty Rd A Dorchester, WI 54425 Phone: 1-800-325-9103 Fax: 715-654-5513 Email: parts@meyermfg.com Website: www.meyermfg.com...

Table of Contents