Initial Operation; Transport/Packing/Storage - KELCH KENOVA set Line V224 Operating Instructions Manual

3 Initial Operation

3 Initial Operation
3.1

Transport/Packing/Storage

The device is packed in stable crates. The heavy weight means there is a risk of injuries
if the crate falls.
Risk of injuries
A falling crate can cause physical injuries! Therefore ensure that crates are generally
secure during all stages of transportation:
 Take care when uploading! Avoid dropping or knocking the machine components!
 Make sure that the permissible crane load is sufficient! Chains, ropes, hooks and
lifting eyes must be in perfect working order and suitable for the specified weights.
Weight information can be found in the technical data table in these instructions. If
suitable lifting equipment is not available, an appropriate transportation company
must be commissioned to unload the unit.
 Always lift up machine components smoothly
 Always stand well clear of suspended loads; danger of death!
 Transport safety devices must be assembled for transport!
If the machine was delivered in transport containers (overseas crates) all the information
required for unloading (load fastening point, crane load) must be printed on the
container.
If the device is wrapped in foil, this must not be damaged if the device is stored!
Otherwise this will void any liability on the part of Kelch GmbH!
KENOVA set Line V224  Kelch GmbH 2013
Kelch GmbH • Werkstraße 30 • D-71384 Weinstadt-Endersbach • Tel. (+49)7151 20522 0 • Fax (+49)7151 20522 11 • info@kelchgmbh.de
Seite 11