Adjusting The Sound; Muting The Sound; Selecting Stereo/Sap Broadcasts - Toshiba 29AS41 Owner's Manual

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, press MUTE again.

Selecting stereo/SAP broadcasts

You can enjoy watching TV while you listen to high-fidelity stereo sound
with the Multi-channel TV Sound (MTS) feature. MTS can also transmit
a second audio program (SAP) containing a second language or other
audio information.
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on the screen when the TV is on, you change the
channel, or press the RECALL button.
The MTS feature is not available while in the VIDEO mode.
When you are watching a stereo broadcast, the word STEREO is
displayed in light blue. You should leave your TV set to STEREO so you
can automatically receive stereo or monaural sound, depending on the
broadcast type. If the stereo sound is noisy, select MONO to reduce the
noise. The word STEREO or SAP is displayed in light blue when the TV
receives the signal.
To select desired sound
Press the MTS button to select the desired sound.
MONO+SAP broadcasting
MAIN SOUND
(MONO)
STEREO+SAP broadcasting
MAIN SOUND
(STEREO)
MAIN SOUND
(MONO)
3K11301B/E P12-21 21
MAIN + SAP SOUND
SAP SOUND
(MONO)
SAP SOUND
MAIN + SAP SOUND
(MONO)
21
POWER
TV VCR CABLE
CH RTN
1 2 3 ENT
4 5 6 100
7 8 9 0
CH +
VOL VOL
– +
MENU/
ENTER
CH –
EXIT RECALL TV/VIDEO FAV
Recall
RESET CAP/TEXT 1/2 FAV
CODE MTS SLEEP MUTE
Mute
MTS
7/18/01, 3:01 PM