Watching Video Input; Selecting The Colorstream Mode; Displaying On-Screen Information; Setting The Sleep Timer - Toshiba 29AS41 Owner's Manual

Watching video input

You can use the TV/VIDEO button on the remote to view a signal
coming from other devices, such as VCRs or video disc players that
may be connected to your TV. (See "Connecting your TV" on page 3.)

Selecting the ColorStream mode

You can use the ColorStream input for connecting the DVD or DTV
receiver.
1. Press MENU, then press
the OPTION menu appears.
2. Press L or M to highlight
COLORSTREAM.
3. Press or
DTV depending on which device is
connected.

Displaying on-screen information

Press RECALL to display the following
on-screen information:
• Channel number or VIDEO mode
selected
• Channel label (if preset)
• Stereo or SAP (second audio program)
audio status

Setting the sleep timer

You can set the TV so it turns off automatically.
To set the sleep timer:
Press the SLEEP button on the remote control. The clock will count
down 10 minutes for each press of the SLEEP button (120, 110, ...10,
0). After the sleep time is programmed, the display will appear briefly
every ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press the SLEEP button and the remaining time will be momen-
tarily displayed.
To cancel the sleep timer:
Press the SLEEP button repeatedly until the display turns to 0.

Using the closed caption feature

You have two options with the closed caption feature: captions or text.
A caption is a printed version of the dialogue, narration and/or sound
effects of a TV program. Text is information not related to the program
that appears on half of the TV screen.
To view captions or text:
1. Select the desired program. The captioned programs are usually
marked in your local TV listing by "CC".
2. Press CAP/TEXT repeatedly to select caption or text mode.
CAPTION CH1
3. Press 1/2 to select caption or text channel.
CAPTION CH2
4. To turn off the closed-captioned feature, press CAP/TEXT
repeatedly until the normal TV viewing appears on the screen.
3K11301B/E P12-21 20
or until
PICTURE AUDIO SET UP
LANGUAGE
CH LABEL
to highlight DVD or
FAVORITE CH
V-CHIP
COLORSTREAM
SELECT
STEREO
SAP
TEXT CH1
TEXT CH2
To select the input mode:
Press the TV/VIDEO button repeatedly to
select desired mode. The signal source you
are connected to is displayed in light blue.
TV VIDEO 1
POWER TV
CH
OPTION
1 2
ENGLISH
START
4 5
START
START
DVD DTV
7 8
ADJUST
VOL
–
MENU/
( TV )
ENTER
CABLE 007
ABCD
EXIT RECALL TV/VIDEO
MPAA
RESET CAP/TEXT
X
CODE MTS
Note:
The factory settings are DVD.
POWER TV
1 2
4 5
7 8
CH +
VOL
–
MENU/
ENTER
CH –
EXIT RECALL TV/VIDEO
RESET CAP/TEXT
Note:
A closed caption signal may not be decoded
in the following situations:
• when a video tape has been dubbed
• when the signal reception is weak
• when the signal reception is non-standard
When you choose a closed captioned channel
and the text mode, the text screen always
appears. When there is no signal, however,
the text screen will not display text characters.
20
7/18/01, 3:01 PM
VIDEO 2 VIDEO 3
COLOR
STREAM
VCR CABLE
CH RTN
3 ENT
100
6
9 0
CH +
VOL
+
Menu
CH –
TV/Video
FAV
Recall
1/2 FAV
Sleep
SLEEP MUTE
VCR CABLE
CH RTN
3 ENT
100
6
9 0
VOL
+
Menu
FAV
Closed
Caption
1/2
FAV