Menu - Settings - QSC MP-M80 User Manual

Menu – Settings
1. – Enables or disables the ability of the
USB playback
MP-Manage app to play audio files from a USB storage
device. When disabled, USB playback controls are not
displayed in the MP Manage app.
Mixer Time:
The MP-M has an internal real time clock that is used with
the Scheduler to schedule scene recall events.
2. Time – Displays the date (DD-MM-YYYY) and time
(hh:mm:am/pm).
3. Time Zone button – Touch to display a listing of
time zones. Touch the time zone in which the mixer
is located.
4. Sync MP-M to App Time
MP-M time to the connected device's time.
Storage and Log:
5. Save System Log to USB
log that may be useful to QSC technicians for trouble-
shooting purposes.
CAUTIONG!: Formatting a drive removes all
data stored on the drive. Make sure there
are no valuable files on the drive.
6. button – The MP-M requires a FAT32 format USB drive for upgrades and for Configuration, Scene and Preset files. This
Format USB Drive
button provides an easy means of applying a FAT32 format to a storage device installed in one of the MP-M USB ports.
7. button – Clears all user presets, user scenes and remote device access settings from internal memory. A confirmation
Clear Internal Storage
dialog displays.
Software:
The Software section is used to check the currently installed firmware version and to perform updates.
8.
End User License Agreement
9. Reset Mixer button – Restores MP-M settings to factory default values.
10. Version – Displays the number of the currently loaded firmware version.
11. Download Upgrade button – Touch to check for and download the upgrade file. If the MP-M is connected to the Internet, it can check for
software versions newer than that currently installed. In order to download the software, a FAT32 USB drive with at least 1 GB of available
memory must be connected to one of the MP-M USB ports.
12. Upgrade button – Touch to begin the process of upgrading the MP-M firmware. A FAT32 format drive with the upgrade firmware is required.
There is no automatic check for newer versions. Checking for upgrades must be manually initiated.
NOTE!:
TD-001578-01-C
button – Touch to sync the
button – Touch to save a
8
button – Touch to display and read the End User License Agreement.
1
2 3
5
9
57
Touch
Menu
4
7
6
10
11 12
Touch
Settings