Table of Contents
Advertisement
Menu – System Test
The System Test screen is a setup and trouble-shooting
tool used to send test signals to the MP-M outputs.
1.
–
Source / RTA
a. When
is selected, a screen is displayed
Source
with options for selection of signal sources and
outputs to test.
b. When
is selected a Real Time Analyzer is
RTA
displayed.
2. Source
Input / Pink Noise / Sine ave
a. Select
>
Source
Input
signal source.
i. Select
>
Source
Input
MP-M Input to be used as a test signal source.
ii. Select
Source
>
Input
level of the Input test signal.
b. Select
Source
>
Pink Noise
the test signal source.
i. Select
Source
>
Pink Noise
the level of the Pink Noise test signal.
c. Select
Source
>
Sine ave
as the test signal.
i. Select
Source
>
Sine ave
the Sine Wave test signal.
ii. Select
Source
>
Sine ave
signal.
3.
Select Output(s)
– Selects which output or outputs will receive the
test signal.
4.
Enable
– Toggles the test signal on and off.
5.
Meter
– Displays the output level of the source.
6. Select RTA –
a. Select
RTA
>
Inputs
– Select any input to view an RTA display of the
input's pre-EQ signal.
b. Select
RTA
>
Outputs
output's post-EQ signal.
TD-001578-01-C
–
to use an Input as the test
>
to choose the
Input
>
Nain
to adjust the
to use Pink Noise as
>
Nain
to adjust
to use a Sine Wave
>
Frequency
to adjust the frequency of
>
Nain
to adjust the level of the test
– Select any output to view an RTA display of the
1.a
6.a
6.b
2.a.i
2.a.ii
2.c.i
1.b
50
Touch
Menu
1.a
1.b
2.a
2.b
2.c
5
4
3
2.a
2.b
2.b.i
2.a
2.b
2.c.ii
Touch
System Test
2.c
5
4
2.c
5
4
- Quick Links:
- Mp Install
- Mp Manage
- Mp Install
Hide quick links:
Advertisement
Table of Contents
