Setting The V-Chip; Selecting A Password - Toshiba 27D47 Owner's Manual

Setting the V-Chip

Note: The V-Chip feature is available for the U.S. V-Chip system
only. The Canadian V-Chip system is not supported.
You can prevent others from viewing certain programs or channels by
blocking them using the V-Chip feature.

Selecting a password

Before you can use the V-Chip feature to block programs and channels,
you must select a password. The password you select prevents others
from changing the rating limits you set.
To select your password and access the V-CHIP menu:
1. Press MENU, then press
2. Press or
press .
3. Use the Channel Number buttons (0-9) to
enter your password.
If you are accessing the V-CHIP menu for
the fi rst time, select a four-digit number
to be your password. Press ENTER.
4. Enter the password again to confi rm it,
and then press ENTER.
The V-CHIP menu appears.
5. You may now set up the V-CHIP menu. See "Using the V-Chip
(parental control) feature" (page 17).
To change your password:
1. Press MENU, then press
2. Press or
3. Use the Channel Number buttons (0-9) to enter your password.
Press ENTER. The V-CHIP menu appears.
4. Press or
display the CHANGE PASSWORD menu.
5. Use the Channel Number buttons (0-9) to enter a new code.
Press ENTER.
6. Enter the password again to confi rm it, and then press ENTER.
7. Press MENU repeatedly until the menu screen is cleared.
Note: To return to normal viewing immediately, press EXIT.
30K-01(B)_EN.indb 16 30K-01(B)_EN.indb 16
or to display the OPTION menu.
to select V-CHIP, then
A D D / E R A S E
SAP
C L O S E D C A P T I O N
V - C H I P
A U T O S H U T O F F
V - C H I P
D I G I T A L S E T U P
A U T O S H U T O F F
or to display the OPTION menu.
to select V-CHIP, then press .
to highlight CHANGE PASSWORD and press
OFF
O F F
Analog mode
OFF
Digital mode
V - C H I P S E T
N E W
P A S S W O R D :
0 – 9 / E N T E R
V - C H I P S E T
C O N F I R M
P A S S W O R D :
0 – 9 / E N T E R
to
16
CHANNEL
NUMBERS
(0-9)
EXIT
MENU/
ENTER
9/3/2550 16:41:00 9/3/2550 16:41:00