Keyless Entry System; Starting The Engine - Mazda MX-5 MIATA Smart Start Manual

Key
Lock
Unlock
Trunk
Panic Alarm
Advanced Key
Door Request Switch
Trunk Request Switch

KEYLESS ENTRY SYSTEM

This system remotely locks and unlocks the doors and the trunk, and opens
the power windows.
Release Button
• Push to extend key.
• Push & hold to retract key.
Lock
• Push once to lock
both doors.
• Push twice (within ve
seconds) for horn sound
veri cation that both
doors are locked.
Trunk
• Push and hold to
1 open trunk.
ADVANCED KEYLESS ENTRY SYSTEM
• This system allows you to lock and
unlock the doors, and even start the
engine without ever taking the key out.
While Carrying the Advanced Key...
• Unlock the driver's door by pushing
the driver's door request switch once.
• Unlock all doors by pushing the
driver's door request switch twice
OR by pushing the passenger's door
request switch once.
• Lock all doors by pushing the driver's
door or passenger door request
switch once.
• Open the trunk by pushing the trunk
request switch once.
• Open the front windows by pushing
the unlock button on the advanced key
and then pushing again and holding;
release to stop.
Unlock
• Push once to unlock
driver's door.
• Push twice (within three
seconds) to unlock
both doors.
•
Push twice and hold to
open front windows.
Panic Alarm
• Push for one second or
more to activate alarm.
• Push Lock, Unlock,
or Panic Alarm to turn
Retractable Key alarm off.

STARTING THE ENGINE

While Carrying the Advanced Key...
• Start the engine by pushing the start knob in and turning it (like a
normal key) while pushing the clutch pedal (manual transmission) or the
brake pedal (automatic transmission).
• Shut the engine OFF by turning the start knob to the ACC position
and then pushing in and turning to the Lock position.
• The KEY indicator light will illuminate
key is detected. If the KEY indicator light ashes GREEN, the
advanced key transmitter battery power is low.
• If the advanced key cannot be used due to a malfunction or dead
advanced key battery, use the auxiliary key to lock/unlock the doors
and to start the engine.
With the Auxiliary Key...
1 To start engine, remove
the Start knob cover
by squeezing both
release buttons and
pulling the cover off.
2 Push the key release to
remove the auxiliary key.
3 Insert the auxiliary key into
the key cylinder and turn
it to start the engine.
Advanced Key (Rear)
Key
Release
GREEN when the advanced
Release Buttons
Auxiliary Key
(for opening the doors and
starting the engine)
2