Viewing The System Status - Toshiba 32HLX95 Owner's Manual

Viewing the system status

To check the system status:
1. Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER. (A new set of
Installation menu icons will appear on-screen, as shown
below right).
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI Audio Auto
Gray Level 2
Navigate Select CH RTN Back EXIT Exit
3. Open the System Status menu, highlight System
Information, and then press ENTER.
4. Use x • to scroll through the menu bar to check the
Product Information and Software Version.
System Information
Product Information
Brand: Toshiba
Model: 32HLX95
Done
To close the screen and return to the Installation menu:
Highlight Done and press ENTER.
To return to normal viewing:
Press EXIT.
Restore Factory Defaults
To restore all settings and channels to their factory default
values:
1. Follow steps 1–3 above.
2. Use x • to scroll through the menu bar to select Factory
Defaults.
System Information
Factory Defaults
This window provides the ability to reset the TV
settings.
Type in your PIN now (or "0000" if no PIN has
been set) to restore settings to their factory
default values.
Done
3. Enter your PIN code (or 0000 if no PIN code has been set).
4. Highlight Yes and press ENTER. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the restore process.
To cancel the reset:
Highlight No and press ENTER.
Chapter 6: Setting up your TV
System Status
System Infomation
Navigate Select CH RTN Back EXIT Exit
System Information
Software Version
0.8.2
Jun 13 2005 - 13:54:14
FW:1.41
Sub:41
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
45