Installing The Recoil-Starter Rope In The Rope Guide; Filling The Engine With Oil - Toro Recycler 20958 Operator's Manual

Figure 7
1. Folded position
4. Insert the carriage bolt (with the bolt head toward
the inside) through the upper or lower square hole in
handle bracket and the upper hole in the handle end
(Figure 8).
Figure 8
1. Handle knob
5. Loosely install the handle knobs onto the carriage bolts.
6. Refer to steps 3 through 5 of
Height (page 9).
g036578
2. Operating position
g032869
2. Carriage bolt
Adjusting the Handle
3
Installing the Recoil-Starter
Rope in the Rope Guide
No Parts Required
Procedure
Important: To start the engine safely and easily
whenever you use the machine, install the recoil-starter
rope in the rope guide.
Pull the recoil-starter rope through the rope guide on the
handle (Figure 9).
1. Recoil-starter rope
4

Filling the Engine with Oil

No Parts Required
Procedure
Note: Your machine does not come with oil in the engine,
but it does come with a bottle of oil.
Max. fill: 0.53 L (18 oz), type: SAE 30 detergent oil with an
API service classification of SF, SG, SH, SJ, SL, or higher.
1. Remove the dipstick
5
Figure 9
2. Rope guide
(Figure 10).
g003251