Installation - Blodgett FlavorSmoke 450 Installation Operation & Maintenance

INSTALLATION

1. The smoker controller is to be attached to a panel of the oven.
2. Use the mounting plate as a drill jig template for drilling 3/16" holes to mount the plate. The mounting plate should be
located at a proper height for easy access. Note orientation of the mounting plate.
3. Attach the mounting plate to the inside of the body panel using the 4 screws provided (2 screws for top mount).
4. Once attached, reattach the body panel to the oven. The smoker controller can now be attached to the oven by
means of the keyhole slots.
EXLODED VIEW - SIDE MOUNT
Screws
Mounting
Plate
EXLODED VIEW - TOP MOUNT
Mounting
Plate
FINISHED VIEW - SIDE MOUNT
Body Panel
FINISHED VIEW - TOP MOUNT
3 FLAVORSMOKE 450