Electrical Connections - Blodgett FlavorSmoke 450 Installation Operation & Maintenance

IMPORTANT
WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE
PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUC-
TIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
FOR YOUR SAFETY - Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other
appliance.
The information contained in this manual is important for the proper installation, use, and maintenance of this device. Ad-
herence to these procedures and instructions will result in satisfactory baking results and long, trouble free service. Please
read this manual carefully and retain it for future reference.
Errors: Descriptive, typographic or pictorial errors are subject to correction. Specifications are subject to change without
notice.
ELECTRICAL RATINGS – 120VAC, 60 Hz, 1 phase, 7 amps.

ELECTRICAL CONNECTIONS

Before making any electrical connections to these appliances, check that the power supply is adequate for the voltage,
amperage, and phase requirements stated on the rating name plate mounted on the unit.
The circuit breaker that is used to provide power to this appliance must have a minimum of .076" (3mm) contact spacing.
The circuit breaker must meet all Local and National installation standards.
All appliances must be installed in accordance with Local or National Electrical codes.
WARNING!! - Improper installation may invalidate your warranty.
U.S. and Canadian Installations - A power cord is supplied with a plug attached. Plug the power cord into the appropriate
receptacle.
WARNING!! - If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
FLAVORSMOKE 450 2