Advertisement
Step 7 Install Bottom Motor Cover (see figure 9)
Remove and save 1 of the 3 screws from the bot-
tom of fan motor housing.
Place cover on housing lining up the 2 keyway
holes over the 2 remaining screws. Rotate cover,
locking screws into keyway holes. Replace screw
you removed earlier.
Tighten all 3 screws securely.
Step 8 Install Bulb & Glass Cover,
or Optional Metal Cap
• For use with light:
Place bulb included with fan into the socket on
the light socket plate. Place glass cover on light
socket plate and rotate until secure (see figure
10A).
• For use without light:
Place solid metal cap onto light socket plate and
rotate until secure (see figure 10B).
Blue
Molex
Connecter
Black
Fig. 9
Glass
Fig. 10A
8
Motor
Motor Cover
Motor Cover Screw
metal cap
Fig. 10B
Bottom
Advertisement
