Advertisement
White
Black
Fig. 4
Step 2 Install the Fan Unit (see figure 4)
Attach the WHITE wire from the junction box to
the WHITE wire from the Fan unit.
Attach the BLACK wire from the junction box to
Ground
the BLACK wire from the Fan unit.
Mounting
Bracket
Now connect the GROUND wire from the mount-
ing bracket to the GROUND wire in the ceiling
Washer
junction box.
Washer
NOTE: Make sure and use wire nuts on these con-
Screw
nections. DO NOT USE PLASTIC TAPE.
If you are using an extended support rod, (longer
than the one supplied with your fan) remove the
half ball from the small support rod that came
with the fan and put it on the extended support
rod. Make sure to retighten the set screw and
insert the safety screw.
5
Advertisement
