Cableclear® Digital Noise Reduction - Toshiba 50M2U User Manual

To select the color temperature:
1 Press the MENU button and open the Picture menu.
2 Highlight Picture Settings, and then press the ENTER button.
3 Highlight Advanced Picture Settings, and then press the
ENTER button.
Highlight Color Temperature, and then press the ( /
4
arrow) buttons to select the mode you prefer (Cool, Medium,
or Warm).
Press the ( /
5
Drive, and then press the ( /
settings:
❖
❖
NOTE
6 To save your new settings, highlight Done, and then press the
ENTER button.
To revert to your original settings, highlight Reset, and then
press the ENTER button.
NOTE
®
CableClear digital Noise Reduction
The CableClear
reduce visible interference in your TV picture. This may be useful
when receiving a broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1 Press the MENU button and open the Picture menu.
2 Highlight Noise Reduction, and then press the ENTER
button.
Using the TV's Advanced Features
Using the advanced picture settings
arrow) buttons to select either B Drive or G
B Drive: press the (
blueish.
G Drive: press the (
greenish.
The B Drive and G Drive settings are connected to the Color
Temperature settings and will change based on which setting is
selected in step 5 above.
If you select one of the factory set picture modes (Dynamic,
Standard, Movie, or PC) and then change the Color Temperature
mode, the picture mode automatically changes to Preference.
®
digital Noise Reduction feature allows you to
arrow) buttons to adjust the
arrow) button to make the picture
arrow) button to make the picture
111