Sound Problems; Remote Control Problems; Channel Tuning Problems - Toshiba 50M2U User Manual

Sound problems

Check the antenna/cable connections, see
antenna, cable TV, or camcorder" on page
The station may be having broadcast difficulties. Try another
channel.
The sound may be muted. Press the VOL (+) button.
If you hear no sound, try setting the MTS feature to Stereo mode,
see "Selecting stereo/SAP broadcasts" on page
If you are not receiving a second audio program from a known SAP
source, make sure the MTS feature is set to SAP mode, see
"Selecting stereo/SAP broadcasts" on page
If you hear audio that seems incorrect for the program you are
watching (such as music or a foreign language), the SAP mode may
be on. Set the MTS feature to Stereo mode, see
stereo/SAP broadcasts" on page
If you connect a computer using either the PC IN terminal or an
®
HDMI
see "Connecting a digital audio system" on page

Remote control problems

Remove all obstructions between the remote control and the TV.
Replace the remote control's batteries, see
page 36.
Your TV's remote control may not operate certain features on your
external devices. Refer to the User's Guide for your other device to
determine its available features. If your TV remote control does not
operate a specific feature on another device, use the remote control
that came with the device, see
on page
If the TV still does not act as expected, perform the Reset Factory
Defaults procedure, see

Channel tuning problems

Ensure that the remote control is set to the correct device mode, see
"Learning about the remote control" on page
The Auto Tuning feature may have erased the channel from
memory. Add the channel to the channel memory, see
channels in memory (optional)" on page
terminal, make sure that the audio setting is properly set,
38.
"Resetting Factory Defaults" on page
Troubleshooting
Sound problems
"Connecting a VCR,
23.
79.
79.
"Installing batteries" on
"Learning about the remote control"
38.
47.
117
79.
"Selecting
29.
54.
"Storing