Adjusting The Audio; Muting The Sound; Using The Digital Audio Selector; Selecting Stereo/Sap Broadcasts - Toshiba REGZA 46SV670U Owner's Manual

Adjusting the audio

Muting the sound

Press W on the remote control to partially reduce (1/2
MUTE) or turn off (MUTE) the sound. Each time you
press W, the mute mode will change in the following
order:
1/2 Mute Mute
If the closed caption mode is set to Off when you select
"MUTE" mode, the closed caption feature is
automatically activated if the TV program is Closed
Captioned. To mute the audio without automatically
activating the closed caption feature, use Z to set the
volume to 0. See "Using the closed caption mode" (-
page 50) for more information on closed caption
modes.
Note: If you modify items in the SOUND menu while mute
is active, the mute will automatically be cancelled to allow
for proper adjustment.

Using the digital audio selector

You can use the Digital Audio setting to conveniently
switch between audio tracks on a digital channel (for
those channels that have multiple audio tracks).
To use the digital audio selector:
1
From the PREFERENCES menu, highlight CC and
Digital Audio Selectors and press T.
2
Press B or b to select Digital Audio.
3
Press C or c to select the desired service, then press
O.
52
Chapter 6: Using the TV's features
Volume

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you
to output high-fidelity stereo sound. MTS also can
transmit a second audio program (SAP) containing a
second language, music, or other audio information
(when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when E
is pressed. The MTS feature is only available for analog
signals on the ANT/CABLE input.
To listen a stereo sound:
1
From the SOUND menu, highlight MTS.
Press C or c to select Stereo and press O.
2
Note:
• You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.
To listen to a second audio program on an analog station
(if available):
Select SAP in step 2.
Note:
• A Second Audio Program (SAP) can be heard only on
those TV stations that offer it. For example, a station
might broadcast another language as a second audio
program. If you have SAP on, you will see the current
program on the screen but hear the other language
instead of the program's normal audio.
• If you have SAP on and the station you are watching is
not broadcasting a second audio program, the station's
normal audio will be output. However, occasionally
there is no sound at all in SAP mode. If this happens, set
the MTS feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the bass,
treble, and balance.
1
From the SOUND menu, highlight the item you
want to adjust (Bass, Treble, or Balance).
2
Press C or c to adjust the level of the desired item,
and then press O.
• C makes the bass or treble weaker or increases
the balance in the left channel (depending on the
item selected).
• c makes the bass or treble stronger or increases
the balance in the right channel (depending on the
item selected).