Displaying Tv Status Information; Understanding The Auto Power Off Feature; Understanding The Last Mode Memory Feature - Toshiba Regza 40XV645U Owner's Manual

Displaying TV status information

To display TV status information using RECALL:
Press E on the remote control.
The following information will display (if applicable):
•Current input (ANT/CABLE, Video 1, etc.)
•If ANT/CABLE is the current input, either "CABLE"
(for cable TV) or "ANT" (for over-the-air broadcasts).
•Channel number (if in ANT/CABLE mode)
•Input label (if set)
•Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signal only)
•Stereo, Mono or SAP audio status (when HDMI input
mode, Dolby Digital or PCM)
•Video resolution
•Aspect ratio of incoming video signal (4:3 or 16:9)
•V-Chip rating status
•GameTimer (if set)
ANT
480i
Stereo
5
: 29min
To close the RECALL screen:
Press E again.
To display TV status information using INFO:
(only available for ANT/CABLE input)
Press Q on the remote control.
The following additional information will display for
off air digital channels (if applicable):
•Title
•Duration
•Detailed description
To display Next information, press Q on the remote
control again. Pressing Q a third time will remove the
entire banner.
ANT
480i
Stereo
2-2
Nashville WX Channel
Nashville WX Channel provides Middle Tenessee and Southern Kentucky
weather.
Note: The location of the banner can be moved to the top
or bottom of the screen by pressing B or b while the
RECALL or INFO display is on-screen. (The last position
will be stored to memory.)
52
Chapter 6: Using the TV's features
4:3
NONE
4:3
8:59am - 4:59pm EST
Understanding the auto power off
feature
The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a vacant
channel or a station that completes its broadcast for the
day. This feature functions in ANT/CABLE mode only.
Note: If it is possible that you will be away from the TV for
an extended period of time, you should unplug the power
cord.
Understanding the last mode
memory feature
If the power is cut off while you are viewing the TV,
the Last Mode Memory feature automatically turns on
the TV when the power is resupplied.