Using The Remote Control To Control; Your Other Devices - Toshiba Regza 40XV645U Owner's Manual

Integrated high definition lcd television
Hide thumbs Also See for Regza 40XV645U:
Table of Contents

Advertisement

Using the remote control to
control your other devices
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate, you must first program the remote control to
recognize the device (if you have not already done so)
(- pages 23).
To use your TV remote control to operate:
•Cable converter box or satellite receiver, set the MODE
SELECT switch to CABLE/SAT.
•VCR, set the MODE SELECT switch to AUX1.
•DVD player or HTIB, set the MODE SELECT switch
to AUX2.
Note: Even after the TV remote control is programmed, it
may not operate certain features on any other devices. If
this happens and you wish to use those features, you will
need to use the device's original remote control.
Point the remote control
directly at the device.
16
17
18
19
Chapter 3: Using the remote control
1
2
3
4
5
6
7
8
9
10 DVD CLEAR Press to reset the title and chapter
11 PLAY Begins playback of a tape or DVD.
12 PAUSE Press during play or record mode to pause
13 STOP Stops the tape or DVD.
14 SKIP z Skips forward to locate later DVD
15 FF Fast-forwards the tape or DVD. (Press during
16 SKIP Z Skips back to beginning of current DVD
17 REW Rewinds/reverses the tape or DVD. (Press
18 TV/VCR To view one program while recording
19 REC Starts tape recording.
20 MODE SELECT Switches Set to "TV" to control the
POWER Turns the selected device on and off.
Channel Numbers (0-9) Press to directly access
channels (as opposed to < ,).
+10 Press to directly access DVD chapters higher
than 10.
TOP MENU Accesses a DVD's top menu.
CH Bb For channels programmed into the channel
memory (- page 28):
B selects the next higher channel.
b selects the next lower channel.
GUIDE Displays the channel guide in the CABLE/
SAT mode.
SET UP Accesses a DVD's setup menu in the AUX
mode.
INFO Displays TV status information on-screen.
BbC c Press to navigate DVD menus (may not
work on some DVD players).
ENTER Required by some satellite receivers and
DVD players to activate certain functions.
number.
the picture; press again to restart.
chapters.
play mode to view the picture moving rapidly
forward.)
chapter, or locates previous chapters.
during play mode to view the picture moving
rapidly backward.)
another, press to select TV mode.
SEARCH Selects a specific DVD chapter, title or
time.
TV; "CABLE/SAT" to control a cable converter box
or satellite receiver; "AUX1" to control a VCR;
"AUX2" to control a DVD player or HTIB.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents