Features; Assembly; Operation - RIDGID JobMax R8223409 Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS
Speed ..............................................0-22,000 r/min. (RPM)

ASSEMBLY

WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and
completely assembled or with damaged or missing
parts could result in serious personal injury.
If any parts are damaged or missing, please call 1-866-539-1710 for assistance.

OPERATION

WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict severe injury.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your
eyes, resulting in possible serious injury.
APPLICATIONS
FIGURE QTY
1
1
10
3
1
1
1
ACCESSORY
1/8 in. Collet
120-Grit Aluminum Oxide Grinding Wheel Bit
15/16 in. X 1/32 in. Cut-off Discs
1-1/4 in. Fiberglass Cut-off Wheel
Mandrel (1/8 in. shank x 1/16 in.)
1/8 in. Drywall Cutting Bit
Shoe with Wrench and Slot End
Collet ........................................................................ 1/8 in.
WARNING:
Do not attempt to modify this product or create
attachments or accessories not recommended for
use with this product. Any such alteration or modi-
fication is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
The use of attachments or accessories not
recommended can result in serious personal injury.
Cutting and trimming metals, plastics and
cut-off wheels, grinding wheels, and emery
5 - English
APPLICATION
Attaching Bits
Ferrous materials:
casting, welds, rivets, rust
Cutting ferrous materials
ceramics
Attaching cut-off discs,
wheel
Cutting drywall
Installing/removing accessories