Removing Pedestal Stand - Toshiba 19C100U Owner's Manual

7) VESA Mounting Pattern
TV Size Hole Pattern(HxV)
19" 100x100
22" 100x100
26" 200x100
32" 200x200
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Remove the four screws shown in the right
diagram. This will allow removal of the pedestal
stand.
3) Once you have removed all four screws, holding
the pedestal stand in place, remove the pedestal
stand from the TV.
19" TV
Four screws
6
Screw Size
mm M4
mm M4
mm M4
mm M6
(unit in mm)
VESA Mounting Pattern
22" TV
Four screws
CAUTION: Always place the TV on the floor or a sturdy,
level, stable surface that can support the weight of the unit.
26" TV
Four screws
32" TV
Four screws
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy
strap from the hook(s) on the rear of the TV to a wall
stud, pillar, or other immovable structure. Make sure
the strap is tight, secure, and parallel to the floor.
VESA Mounting Pattern
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)
VESA Mounting Pattern
Hook
Sturdy strap
(as short as possible)