Toshiba 19C100U Owner's Manual page 19

Note:
• The PC audio input terminals on the TV are shared
with the HDMI-1 analog audio input terminals (
page 44).
• Some PC models cannot be connected to this TV.
• An adapter is not needed for computers with a
compatible mini D-sub15-pin terminal.
• Depending on the DVD's title and the
specifications of the PC on which you are playing
the DVD-Video, some scenes may be skipped or
you may not be able to pause during multi-angle
scenes.
Signal names for mini D-sub 15-pin connector
•
Pin Signal Pin
No. name No.
1 R 6
2 G 7
3 B 8
4 Reserved 9
5 Reserved 10
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to DVI adapter cable and analog
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analog
cables are not necessary ( page 13).
TV back panel
Computer
The HDMI input can accept and display VGA, SVGA,
XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p
(60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal
formats. For detailed signal specifications, see page 56.
Chapter 2: Connecting your TV
Signal Pin Signal
name No. name
Ground 11 Reserved
Ground 12 SDA
Ground 13 H-sync
5V 14 V-sync
Ground 15 SCL
PC audio
cable
PC audio
output
Note:
• The edges of the images may be hidden.
• If receiving a 480i (HDMI), 480p (HDMI), 720p,
1080i, or 1080p signal program, Native mode
scales the video to display the entire picture within
the borders of the screen (i.e. no overscanning).
19