Summary of Contents for Monacor Leuchtkraft PARC-100E/CTW
Page 1
DMX-LED-Scheinwerfer DMX LED Spotlight PARC-100E / CTW Bestell-Nr. • Order No. 1000177 BEDIENUNGSANLEITUNG INSTRUCTION MANUAL LEUCHTKRAFT...
Page 2
Menüstruktur Menu Structure MENU DOWN ENTER Reaktionszeit der LED ENTER sofortige Reaktion … max. träge Reaktion DOWN LED response time MENU DOWN immediate response … slowest response ENTER Temperaturgeregelte Leistungsbegrenzung UP / DOWN Temperature-controlled power limitation MENU Betrieb ohne DMX-Steuergerät: ENTER DOWN Stroboskop...
DMX-LED-Scheinwerfer 1 . sichtbare Schäden am Gerät oder am Netz- kabel vorhanden sind, Diese Anleitung richtet sich an den Installateur 2 . nach einem Sturz oder Ähnlichem der Ver- des Geräts und an den Bediener mit Grundkennt- dacht auf einen Defekt besteht, nissen in der DMX-Steuerung .
Scheinwerfers die zwei Feststellschrauben für den Bügel lösen, den Scheinwerfer wie gewünscht neigen und die Schrauben wieder festdrehen . WARNUNG Das Gerät muss fachgerecht und sicher montiert werden . Wird es an einer Stelle installiert, unter MENU DOWN ENTER der sich Personen aufhalten kön- DMX OUT DMX IN nen, muss es zusätzlich gesichert...
Page 6
4.1 Bedienung des Menüs 4.2.1 DMX-Funktionen im 3-Kanal-Betrieb Die Einstellungen erfolgen über ein Menü, das DMX-Wert Funktion über vier Tasten bedient wird ( ☞ folgende Tabelle Kanal 1 Dimmer (Gesamthelligkeit) und Menüstruktur auf Seite 2) . 0 – 255 dunkel hell Kanal 2 Helligkeit Kaltweiß...
über den 5 . Kanal aus- und einschalten ( ☞ Kapi- tel 4 .2 .2) . Änderungen vorbehalten . Diese Bedienungsanleitung ist urheberrechtlich für MONACOR INTERNATIONAL GmbH & Co. KG geschützt. ® Eine Reproduktion für eigene kommerzielle Zwecke – auch auszugsweise – ist untersagt.
• DMX LED Spotlight A damaged mains cable must be replaced by skilled personnel only . These instructions are intended for installers of the • Never pull the mains cable to disconnect the unit and for users with basic knowledge of DMX mains plug from the socket, always seize the control .
• Always keep a minimum distance of 50 cm to the illuminated surface . Mounting the spotlight: Use the double bracket to mount the spotlight, e . g . by means of a solid mounting screw or a suitable support (C hook) on a crossbar .
Page 10
4.1 Control of the menu 4.2.1 DMX functions in the 3-channel mode The settings are made by means of a menu to be DMX value Function ☞ controlled via four buttons ( table below and Channel 1 Dimmer (total brightness) menu structure on page 2) .
. To simulate the slow response of Subject to technical modification . All rights reserved by MONACOR INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may ® be reproduced in any form or by any means for any commercial use.
Need help?
Do you have a question about the Leuchtkraft PARC-100E/CTW and is the answer not in the manual?
Questions and answers