Disconnecting The Port Replicator - Toshiba PA3314U User Manual

User's Manual

Disconnecting the Port Replicator

To disconnect the Port Replicator, follow the steps below.
1. Set the computer lock to the unlock position.
2. Make sure you perform one of the following:
• Save all your work.
• Turn off the computer's power in any mode: boot, suspend or hibernation.
• Perform any software disconnect operation required by the operating
system.
• Press the eject switch.
CAUTION: Make sure the Eject LED is out. Do not try to disconnect the
computer while the Eject LED is glowing.
3. Pull the eject lever out towards you to disconnect the computer.
Figure 3-5 Disconnecting a notebook from the Port Replicator
4. Lift off the computer.
3-4