Chapter 3 Connections; Connecting The Port Replicator - Toshiba PA3314U User Manual

Connections
The Port Replicator is designed to ensure a secure connection by a few simple
operations.
CAUTION: The system supports warm docking and undocking. Do not
disconnect the Port Replicator from the computer while an application is
running.

Connecting the Port Replicator

NOTE: When the Port Replicator is connected to the computer, Do not
use the ports of the computer. In the case using ports both of the com-
puter and the Port Replicator simultaneously, it may harm the computer,
the Port Replicator and/or data contained in those.
To connect the Port Replicator, follow the steps below.
1. Check the distance from the back of the computer to the Port Replicator
connector. If necessary, slide the adjuster forward so that it will be flush
against the computer.The computer corresponding to the position of the
adjuster is as follows. Refer to http://www.toshiba.com about the model put
on the market in the future. In addition, please inquire of the dealer when you
want to know detailed information.
SLIDE position from #1-#4
Position #1-4
1
2
3
4
product name
PORTEGE 4000 series, PORTEGE M100
TECRA 9000 series
TECRA M1
TECRA S1
TE2000 series
Satellite Pro 6000 series
Satellite Pro M10 series
PORTEGE M200
TECRA M2
Chapter 3
3-1