Safety Notes; Storage, Cleaning - Livarno Living 337620 1910 Assembly Instructions Manual

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety infor-
mation carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (Figure A)
1 x wardrobe, unassembled (A - L)
1 x set of assembly material (b1 - b6)
1 x assembly instructions
Technical data
Maximum load-bearing capacity of the
4
hanging rail: 4kg
Maximum load-bearing capacity of the
3
shelves: 3kg each
Date of manufacture (month/year):
03/2020
Dimensions: approx.
100 x 174 x 46cm (W x H x D)
Material: 100 % polypropylene
Correct use
The product is not designed for commercial use.
The product is designed for indoor use.

Safety notes

Risk to life!
• Never allow children to play with the packag-
ing material unsupervised. There is a risk of
suffocation.
Risk of injury!
• Ensure correct stability before using the
product.
• Place the product on a level surface.
• The product may only be used under adult
supervision and may not be used as a toy.
• Check the product for damage or wear before
each use.
• Please ensure that the product is assembled
correctly and in accordance with these instruc-
tions for use. Incorrect assembly can lead to
injury and may impede safety and function.
• Please ensure that the wall is suitable for wall
mounting of the product. Unsuitable underly-
ing wall surfaces can lead to injury.
Assembly
Important: The assembly of the product
should be undertaken by at least two
persons.
You will need the following tools for the assem-
bly of the product, not included in the scope
of delivery: Phillips head screwdriver and a
suitable drill.
Note: You can attach the hanging rail to the left
or right side. Decide on a side prior to assembly
and assemble the product accordingly.
1. Assemble the product on a level surface, as
shown in figures B - H.
2. The product must be assembled on the wall
for optimum stability (figure I).
Note: Ask your specialist retailer about the
assembly material to use (dowels and screws)
with your masonry.
Note: Do not place objects on the product.

Storage, cleaning

When not in use, always store the product clean
and dry at room temperature. Clean only with
water and wipe dry afterwards with a cloth.
IMPORTANT! Never clean the product with
harsh cleaning agents.
GB/IE 9