Table of Contents
Advertisement
64
Connecting Other External Devices
Adding memory
CAUTION: To avoid damaging the computer's screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
The computer has two memory expansion slots—Slot A and
Slot B. You can install one or two memory modules.
1
Shut down your computer completely using the Shut Down
command. See
page
2
Unplug the computer.
CAUTION: Installing a memory module with the computer's
power on may damage the computer, the module, or both.
3
Close the display panel and remove any cables you may have
connected.
4
Turn the computer upside down.
5
Locate and remove the screws that hold the cover plate in
place, and lift the cover off of the memory module bay.
Removing the memory module cover
"Powering down the computer" on
99.
Advertisement
Table of Contents
