Table of Contents
Advertisement
152
Exploring Your Options
Customizing WinDVD
❖
❖
❖
❖
6
In the Dolby Pro Logic box, select the Always enable check
box to enable Dolby Pro Logic. Clear the check box to disable
it.
7
To test Dolby Pro Logic, click the Test button.
Setting display properties
1
Launch WinDVD, if it is not already running.
2
On the WinDVD control panel, click the Properties button.
WinDVD displays the Properties dialog box, with the
General tab on top.
3
In the Properties dialog box, click the Display tab.
The Display tab moves to the front.
Properties dialog box with Display tab selected
No vocal does not output vocals to any speaker.
Left vocal outputs vocals to left speakers only.
Right vocal outputs vocals to right speakers only.
Both outputs vocals to both left and right speakers.
Advertisement
Table of Contents
