Toshiba TE2100 Series User Manual page 208

208
If Something Goes Wrong
Resolving a hardware conflict
the
Enter key
registered, press
continue working.
If you are using the built-in screen, make sure the display priority
is not set for an external monitor. To do this, hold the
press
F5
key and press
Fn
options.
If you are using an external monitor:
❖
Check that the monitor is turned on.
❖
Check that the monitor's power cable is firmly plugged into a
working power outlet.
❖
Check that the cable connecting the external monitor to the
computer is firmly attached.
❖
Try adjusting the contrast and brightness controls on the
external monitor.
❖
Press
priority is not set for the built-in screen.
The screen does not look right.
You can change the display settings by clicking a blank area of the
desktop with the secondary control button, then clicking
Properties. This opens the Display Properties dialog box. The
Appearance tab of this dialog box allows you to choose the colors
for the screen. The Settings tab allows you to choose the screen
resolution.
The built-in screen flickers.
Some flickering is a normal result of the way the screen produces
colors. To reduce the amount of flickering, try using fewer colors.
To change the number of colors displayed:
1 Point at the desktop and click with the secondary button.
, type the password and press
. The screen reactivates and allows you to
Enter
twice. A window with display choices pops up. Hold the
twice again to advance through the display
F5
and simultaneously to make sure the display
Fn F5
. If no password is
Enter
key and
Fn