Download Print this page

Toshiba IPedge Manual page 16

Hide thumbs Also See for IPedge:

Advertisement

Group CO Button
Hands Free Answer Back
IP Phone User Mobility
Jumping LED
LCD Shift Key
Make Busy
Manual Voice Recording
Music On Hold
Network DN Table
© 2011 Toshiba Information Systems, Inc. All Rights Reserved. All product, service and company names are trademarks, registered trademarks or
service marks of their respective owners. This document and the information included herein is subject to change without notice.
The system orbit number needs to be previously stored as a part of the
Flexible Numbering Plan.
Appearances of the GCO button assigned to the public trunk to be parked
can show either "Hold" or "In-Use" indication at parking the call, per the
setting. It is possible to retrieve the parked call by pressing the GCO
button if "Hold" is indicated while parking the call.
Since a Hands Free call is regarded as an incoming call of the service,
holding service is not applied.
It is possible to log out or invoke Transfer Registration while in the parked
call. The parked call continues even if the parked party logs out.
It is possible to log the parking party out. The Lost Call Treatment feature
is invoked if the recall terminates after the parking party logs out.
It is possible to specify the DN of a Remote station as the orbit number for
Remote park even if the DN is logged out.
The Jumping LED feature is applied the same as ordinary answering to
retrieve a parked call from the public trunk.
Each feature button can be set on both the fore side and the hidden side.
The service using LED continues even though it is not indicated while on
the hidden side.
If the park invoking party goes into Make Busy state while setting a call in
park, the call will be disconnected before it can be parked.
If a parked party goes into the Make Busy state while setting park, the call
is disconnected and Call Park Orbits feature is finished.
If a parked party goes into Make Busy state by command while setting
park, the parking call operation continues because the Make Busy state is
applied until the parked party goes into Idle state. This means the call is
not finished.
Using the Call Park feature cancels the Voice Recording automatically.
Held party hears MOH while the call is parked.
The system orbit cannot be assigned as a Network DN.
IPedge / VIPedge Feature Desc. 7/25/12
1-2

Advertisement

loading

This manual is also suitable for:

Vipedge