Table of Contents
Advertisement
Section 6: Programming for Odor Intensity Operation
Conducting An Odor
Intensity Test: (cont.)
Calibration:
Date system was last factory calibrated and date
system is due for factory re-calibration.
Step 4: Press Enter to sign on. Press the Enter
key on the keypad to begin data configuration for a
test.
Step 5: Set User by using the arrow keys, select
the user name and press Enter. Proceed to Step 6.
If the correct name is not present, select
Add User and press Enter.
ENTER NEW USER
Type in the new user name and press
Enter.
ENTER USER PIN
Select and type in a 2 digit personal
identification number and press Enter.
RE-ENTER USER PIN
Type in the above selected number and
press Enter for verification.
SET USER
The new user name should now be dis
played.
Use the arrow keys to select the
user and press Enter.
Y Z S y s t e m s • 8 8 2 5 N . S a m H o u s t o n P k w y W e s t • H o u s t o n , Te x a s • U S A • 7 7 0 6 4 • P : 2 8 1 . 3 6 2 . 6 5 0 0 • F : 2 8 1 . 3 6 2 . 6 5 1 3
Page 24
DX-1000G/L ver.05132020
Hide quick links:
Advertisement
Table of Contents
