Section 4: Preparing Your Dtex For A Test; System Configuration - YZ Systems DTEX DX1000G/L Instructions & Operating Manual

Section 4: Preparing Your DTEX For A Test

System Configuration

The DTEX system can be up loaded with all
required test location and user data prior to
conducting tests via host PC and DTEX Report-
er Software. This facilitates more efficient and
simpler use of the DTEX system by requiring
less user and location data input each time a test
is conducted.
The following items can be uploaded into the
system using reporter software:
•User names
•User personal identification numbers (PIN)
•Test locations
•Test location cities
•Test location states/provinces
•Test location zip codes
•Altitudes
For instructions on configuring and uploading
the DTEX system and other features of Report-
er Software, please refer to the Reporter user's
manual.
Should on-site initial configuration, changes, or
new additions to the DTEX system need to be
made, please refer to Sections 5 or 6:
Programming Operations - Detailed.
Y Z S y s t e m s • 8 8 2 5 N . S a m H o u s t o n P k w y W e s t • H o u s t o n , Te x a s • U S A • 7 7 0 6 4 • P : 2 8 1 . 3 6 2 . 6 5 0 0 • F : 2 8 1 . 3 6 2 . 6 5 1 3
DX-1000G/L ver.0 Page 13