YZ Systems DTEX DX1000G/L Instructions & Operating Manual page 25

Section 5: Programming for Odor Concentra tion Operation
Conducting An Odor
Concentration Test: (cont.)
Step 9: Set the altitude using the arrow keys and
press Enter. (Set to nearest 500 feet.)
Step 10: Verify Data: verify that all data entered for
test location is correct by using arrow keys to scroll
through data. Press Enter to continue.
Step 11: Is Data Correct? If correct, select Yes
and press Enter and proceed to Step 12. If data
is incorrect select No and press Enter. Re-enter
information as required.
The configuring hardware display will be present
and the unit will begin to run to configure hardware
for a test.
Y Z S y s t e m s • 8 8 2 5 N . S a m H o u s t o n P k w y W e s t • H o u s t o n , Te x a s • U S A • 7 7 0 6 4 • P : 2 8 1 . 3 6 2 . 6 5 0 0 • F : 2 8 1 . 3 6 2 . 6 5 1 3
DX-1000G/L ver.05132020 Page 19