Related Manuals for Inelco ULTIMA-TIG
Summary of Contents for Inelco ULTIMA-TIG
- Page 1 Operators Manual ULTIMA ULTIMA- - - - TIG ULTIMA ULTIMA 51129701 X V1 (4381) 2003-06-16 Welding Automation Pty Ltd. http://www.WeldingAutomation.com.au E-mail: info@weldingautomation.com.au...
- Page 2 ULTIMA-TIG INSTRUCTION MANUAL EU statement of compliance Manufacturer: INELCO GRINDERS A/S Handvaerkervej 6 D-9690 Fjerritslev Denmark Telephone: +45 98 21 15 55 Fax: +45 98 21 35 95 SE/VAT No.: DK 13269890 E-Mail: inelco@inelco.com hereby declare that Machine: ULTIMA-TIG Type: UT 03 / 04 Serial No.:...
-
Page 3: Table Of Contents
This instruction manual and the accompanying supplier’s instruction for use must be accessible at all times to staff engaged in the installation, operation and maintenance of the machine. Inelco A/S • Haandvaerkervej 6 • DK-9690 Fjerritslev • Denmark 2/12 E-mail: info@weldingautomation.com.au... -
Page 4: General Machine Description
I NSTRUCTION MANUAL 1. General machine description ULTIMA-TIG is a patented grinder with a diamond wheel for wet grinding of tungsten electrodes. This unique and patented construction gives together with the well- known benefits of wet grinding, many advantages to obtain a perfect welding result. -
Page 5: Operational Elements
(7)). There is sufficient liquid in the grinding chamber when the diamond wheel is seen to pump the fluid as the machine is switched on. For safety reasons the grinding l iquid must be drained f rom the ULTIMA-TIG into a sealed closed container during transport. -
Page 6: Setting The Grinding Angle
(10) and turn it left. Remove the electrode. 8. M aintenance The ULTIMA-TIG should always be filled with sufficient grinding liquid to ensure optimum collection of all grinding dust as well as adequate cooling of the grinding process. The correct liquid level is between the minimum mark and 3mm above. -
Page 7: Replacement Of Grinding Wheel
Please follow the procedure below when disassembling the machine: The power to the ULTIMA-TIG must be turned off – pull the plug The g rinding l iquid i s tapped off, scr ews ( 21A), pl astic inspection cov er ( 6) and cover frame (7) are removed. - Page 8 Space piece motor Abstandstück Motor 44520019 Afstandsskrue Str etching screw Abstandschraube 44520022 Etiket Ultima-TIG Label Ultima-TIG Etikett Ultima-TIG 62189222 Væskebeholder 5 ltr. Liquid container 5 ltr Flüssigkeitsbehalter 75494000 Inelco A/S • Haandvaerkervej 6 • DK-9690 Fjerritslev • Denmark 7/12 E-mail: info@weldingautomation.com.au...
-
Page 9: Drawing
INELCO A/S I NSTRUCTION MANUAL 14. Drawing of Ultima-TIG 9A+B 9A+B Inelco A/S • Haandvaerkervej 6 • DK-9690 Fjerritslev • Denmark 8/12 E-mail: inelco@inelco.com... - Page 10 Drawing Ultima-TIG – Changing of the grinding disc. 9A+B 9A+B 1. Raise the adjustment level to high position. 2. Loosen the 3 screws at the back of the grinding console – remove the console to make access to the grinding wheel.
-
Page 11: Ultima-Tig /Neutra Grinding Liquid
INELCO A/S Industrivej 3 DK-9690 Fjerritslev Denmark Tel +45 98 21 15 55 Fax+45 98 21 35 95 Welding Automation Pty Ltd 5/51 Taunton Drive Cheltenham Vic 3192 Tel 0 8 6 2 Fax 03 9011 6203 ……………………………………………………………………………… NEUTRA grinding liquid... - Page 12 Neutra Grinding Liquid EP770 Ultima TIG Grinding Liquid (concentrate) Part Numbers; 75491301 75491300 2.1 Use When diluted (19:1) with water, used as lubricant/coolant in NEUTRA and Ultima-TIG tungsten grinding machines. 3.1 Appearance Green, water-based liquid. 3.2 Odour None detectable. 3.3. Ingredients...
- Page 13 3.5 Hazard Identification Not classified as hazardous Repeated or prolonged contact may lead to skin irritation. 4. First aid measures Eyes: Immediately flood the eyes with plenty of water for at least 15 min, holding the eye open. Obtain medical assistance if soreness or redness persists. Skin: Wash skin with soap and water.
- Page 14 The product is not classified as dangerous to the environment. The product will leach into soil. 13. Disposal Used fluid is to be disposed of according to local regulations or returned to Inelco A/S or its distributors. 14. Transport information The product is not classified as dangerous goods 15.
- Page 15 R-sentences : none S-sentences : none 16. Other information MSDS date revised: March 2012.