82
Connecting Other External Devices
Inserting and removing hard drives
Inserting and removing hard drives
Your Tecra
Depending upon the original hard drive installed in your
computer, you may wish to increase storage capacity by
changing the internal drive, or you can also add additional
hard drive space by inserting a drive into the select bay
module.
To change the internal hard drive.
1
Shut down your computer completely using the Shut
down command. See
page
2
Unplug the computer and remove the battery.
3
Close the display panel and remove any cables you may
have connected.
4
Turn the computer upside down.
5
Remove the screw on the hard drive bay cover.
Removing the hard drive cover screws
6
Lift the hard drive bay cover to expose the hard drive.
®
M1 can use various hard drive capacities.
63.
"Turning off the computer" on