76
Connecting Other External Devices
Adding memory
2
Unplug the computer and remove any cables you may
have connected.
3
Open the display panel and remove the panel that
contains the Power and TOSHIBA Console buttons.
Using a flat head screw driver to pry the panel off
You can pry the panel out of its position by using a flat head
screwdriver. Starting at the left or right side, carefully wedge
the flat head screwdriver between the panel and the
surrounding housing. Grasp the end of the panel, lift up and
wiggle it back and forth until the panel comes free.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
When removing the computer's power and TOSHIBA Console
button panel to install additional memory, be careful not to
damage the display or circuit board.