Motorola moto 360 User Manual-Draft page 13

During your activity
During an activity your watch will show
live data fields relevant to the activity
you chose. If ​ " always-on screen"​ is
enabled (​ S ettings > Display >
Always-on screen​ ) , data fields will
continue to show and update when not
interacting with the watch but at a
slower rate. Use the rotating crown or
swipe up and down on the screen to view additional data
fields.
Pause: ​ T o quickly pause or unpause the activity, press the
bottom hardware button. You can also scroll to the top of the
workout and select ​ P ause activity​ .
Finish:​ To finish an activity, scroll to the top and tap ​ P ause
activity ​ o r press the bottom hardware button. Once paused,
select ​ E nd activity​ . When an activity is completed you will see
the summary screen, swipe right or press the crown hardware
button to return to the watchface. Activities will be synced to
the Google Fit mobile app when the Moto 360 connects to the
internet.
Draft
Changing watch bands
Your Moto 360 (Gen 3) includes 20mm Quick-release bands
and are designed to be swapped out easily.
To remove the watch band:
Place your Moto 360 face
down on a soft cloth. Slide
the metal latch on one band
toward the center of the
band to release its pin from
the watch. Then gently angle
the band away from the
watch to remove it. Repeat
with the other band.
To attach the watch band:
Take one band and insert
the pin on the side opposite the latch into the hole in the
watch. Slide the latch toward the center of the band and insert
its pin into the other hole. Tug gently to ensure the band is
secure. Repeat with the
other band.
Tip:​ Make sure the band
with the buckle is on the top
side of the watch.