Toshiba A2 User Manual page 58

58
Getting Started
Adding memory
Sample removing the memory module slot cover
7 Place the screw and the cover in a safe place so that you
can retrieve them later.
8 Remove the new memory module from its antistatic
packaging.
9 Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
10 Gently press down on the memory module connector
until the clips snap into place.
Do not force the memory module into position. The memory
module should be level when secured in place.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
Memory module slot cover