Connecting The Display Device - Toshiba 9100 User Manual

54
Connecting Other External Devices
Using external display devices

Connecting the display device

If you're connecting a television or other video display device to
the computer's video-out port, first refer to "Selecting video
cables" below for guidelines on choosing a video cable, then refer
to "Connecting to the video-out (composite) port" on page
If you're connecting an SVGA monitor, skip to
external monitor or projector" on page
Selecting video cables
To connect a device to the video-out port, you'll need to purchase
a composite video cable. For the best video quality, always use a
properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Using a poor quality cable may result in a dull or fuzzy picture,
poor color, ghosting, video noise, or loss of video.
Connecting to the video-out (composite) port
NOTE: Video cables are not included with your computer. To
connect a device to the video-out port, you'll need to
purchase a composite video cable.
1 Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its video-in port.
2 Connect the other end of the video cable to the video-out port
on the left side of the computer.
"Connecting an
55.
54.