Turning Off The Computer; Closing The Display Panel - Toshiba 9100 User Manual

9100 user's guide
Table of Contents

Advertisement

Turning off the computer

It's generally a good idea to turn off your computer when you are
not using it.
If you are using the computer for the first time, leave the computer
plugged into a power source (even though the computer is off) to
fully charge the main battery. With the computer off, it may take
up to three hours to recharge the main battery.
Guidelines for turning off the computer:
If you have work in progress and are not connected to a
network, use the Windows
system settings to memory so that, when you turn on the
computer again, you will automatically return to where you
left off.
To leave the computer off for a longer period, you can use the
Windows
domain server or the Shut down when connected to a domain
server instead. For more information, see
the computer" on page
CAUTION: Never turn off the computer while any drive is in
use. Doing so may damage the media in use and result in
loss of data.

Closing the display panel

When you are finished, shut the computer down and close the
display panel to keep dust and dirt out of the computer.
If you close the computer while it is still on, these actions will
occur:
If you have the LCD power-saver feature set, the LCD panel
will automatically turn off until you open it again.
Turning off the computer
®
Turn Off command when not connected to a
Getting Started
®
Standby command to save your
103.
"Powering down
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tecra 9100 series

Table of Contents