Toshiba 9100 User Manual page 213

You press the CD-ROM or DVD-ROM eject button, but the
CD-ROM or DVD-ROM tray doesn't slide out.
Make sure the computer is connected to a power source and turned
on. The CD-ROM or DVD-ROM drive eject mechanism requires
power to operate.
If you need to remove a disc and cannot turn on the computer (for
example, if the battery is completely discharged), use a narrow
object, such as a straightened paper clip, to press the manual eject
button. This button is in the small hole next to the CD-ROM or
DVD-ROM eject button on the face of the CD-ROM/DVD-ROM
tray.
Some discs run correctly but others do not.
Check the type of disc you are using. The DVD-ROM and DVD-
ROM/CD-RW drive supports the Digital Versatile Disc (DVD)
formats DVD-ROM, DVD-R (read-only), and DVD-RW (read-
only) plus CD-ROM, CD-R (read-only), and CD-RW (read-only).
The CD-ROM drive supports CD-ROM, CD-R (read-only), and
CD-RW (read-only).
HINT: The DVD-ROM drive is initially set for Region 1 (North
America) DVDs. You can change this setting (refer to
"Setting general properties" on page
limited number of times.
If the problem is with a data CD or DVD, refer to the software's
documentation and check that the hardware configuration meets
the program's needs.
The disc will not come out of the drive when you click the
eject button on the screen.
Press the button on the CD-ROM or DVD-ROM drive itself.
Troubleshooting Guide
Resolving a hardware conflict
157), but only a very
213