Rabbit 101-1147 Getting Started

RIO Programmable I/O Kit

The RIO Programmable I/O Kit is intended to demonstrate how to expand an embedded control system
design by adding additional I/O and other features. The Kit provides a Prototyping Board with a Rabbit
RIO chip already installed and configurable header locations to allow you to develop your own appli-
cation using the Dynamic C function calls and sample programs included with the Kit.

Application Kit Contents

The RIO Programmable I/O Kit contains the following items:
2 CD-ROMs — Dynamic C
•
sample programs and information related to the RIO Programmable I/O Kit.
RCM4110 module.
•
Rabbit RIO Prototyping Board.
•
Universal AC adapter, 12 V DC, 1 A (includes Canada/Japan/U.S., Australia/N.Z., U.K., and
•
European style plugs) .
10-pin header to DB9 programming cable with integrated level-matching circuitry.
•
Getting Started instructions.
•
Plastic and metal standoffs with 4-40 screws.
•
A bag of jumpers and jumper wires for use on the
•
Prototyping Board.
Rabbit 4000 Processor Easy Reference poster.
•
Registration card.
•
Visit our online Rabbit store at
the latest information on peripherals and accessories that
are available for the Rabbit RIO chip.
Rabbit and Dynamic C are registered trademarks of Rabbit Semiconductor Inc.
®
with complete product documentation on disk, and supplemental CD with
www.rabbit.com/store/ for

Installing Dynamic C

Insert the CD from the RIO Programmable
I/O Kit in your PC's CD-ROM drive. If the
installation does not auto-start, run the
setup.exe program in the root directory of
the Dynamic C CD. Install any Dynamic C
modules after you install Dynamic C .
®